Black Friday Air Fryers, Dehumidifiers & Heated Throws: Check the Running Cost, Not Just the Sale Price

Ad: this post contains affiliate and referral links, marked (ad). As an Amazon Associate I earn from qualifying purchases. I may earn a reward if you sign up through a referral link and meet the qualifying terms.

Last updated: 19 November 2026

Looking up Black Friday appliance running costs UK before you buy? I’d start with one question: what will this appliance cost me to do the job I need it to do, every week?

Quick answer. A £60 appliance can cost more over two winters than a dearer model if it draws more power for the same job. The maths is simple: kilowatts × hours × electricity unit rate in pence per kWh gives you the cost in pence. Ofgem’s October–December 2026 average is 26.32p per kWh for capped tariffs paid by Direct Debit in Great Britain. Use the rate on your own bill for a household estimate. For ovens and air fryers, compare the cost of cooking the same meal. For dryers, compare energy per cycle. Then weigh the saving against the price in my Black Friday UK guide.

Air fryer, energy monitor plug, calculator, and budgeting notebook on a UK kitchen worktop comparing Black Friday appliance running costs

Comparing televisions? My UK TV buying guide shows how to turn the energy label’s kWh figures into an annual running cost. If the appliance can wait, my Black Friday vs Boxing Day sales guide can help you decide when to check prices again.

The 30-second wattage formula every Black Friday shopper should know

As a materials chemist and former science teacher, I find it helps to give the two units different jobs. Watts tell you how quickly the appliance draws power. Kilowatt-hours tell you how much electricity it uses over time. Divide watts by 1,000 to get kilowatts. Divide minutes by 60 to get hours.

Cost in pence = (watts ÷ 1,000) × hours × your unit rate in pence per kWh. For example, a 120 W throw running at full power for two hours uses 0.24 kWh. At 26.32p per kWh that’s 6.32p. Divide pence by 100 to turn it into pounds.

The rating on the box gives a full-power estimate. Thermostats, programmes and humidity sensors can change how long the device actually draws that power. If the energy label gives kWh per cycle, use it. If the appliance and monitor manufacturers permit it, a suitable plug-in meter can show kWh for a complete job. Check your actual usage and Direct Debit if you want to see whether those savings are showing up on your account.

Black Friday appliance running costs table at 2026 UK rates

These are rounded examples at 26.32p per kWh. The winter column applies the same rate for 90 days as a comparison, so substitute the applicable rate if your tariff changes. Your standing charge belongs in your household bill and is separate from the extra electricity these examples use.

AppliancePower assumptionPer hour at assumed powerEstimated three-month use
Dual-zone air fryer2,400 W example63.17p£18.95 (30 min, 60 meals)
Electric fan oven2,000–2,500 W examples52.64p–65.80p£31.58–39.48 (60 min, 60 meals)
Compressor dehumidifier250 W example6.58p£23.69 (4 h/day, 90 days)
Desiccant dehumidifier600 W example15.79p£56.85 (4 h/day, 90 days)
Heated throw120 W example3.16p£5.69 (2 h/day, 90 days)
Heat-pump tumble dryer800 W example21.06p£8.11 (39 cycles at 0.79 kWh)
Condenser tumble dryer2,500 W example65.80p£35.21 (39 cycles at 3.43 kWh)
Central heating boostDepends on fuel, system and heat demandMeasure energy used during boostMultiply extra kWh by your fuel rate and number of boosts

The 2,400 W air fryer is a round comparison figure. For reference, the Ninja AF400UK manual lists 2,470 W. The Meaco Arete One 20L lists 216 W at 20°C and 60% relative humidity. Check the model, operating conditions and setting when comparing ratings.

4 Black Friday appliance traps where cheap costs you more

1. Compare tumble dryers by the load

Bosch compares a heat-pump model rated at 79 kWh per 100 cycles with an older condenser rated at 343 kWh per 100 cycles under the same test basis. Treat that as a named-model example. At 26.32p per kWh the difference is about 69p per cycle.

At three loads a week, that’s around £108 in electricity over 52 weeks. At five loads a week, it’s about £181. If the heat-pump dryer costs £100 extra, the example breaks even after roughly 144 cycles. An infrequent user will take longer to get that premium back. Compare capacity, programme time, delivery cost and the room temperature range the manual allows.

2. Match the dehumidifier to the room

A compressor unit can be a good starting point for a heated room. A desiccant model can be more suitable for a colder space where the compressor’s extraction drops. EcoAir’s comparison explains the difference. Use the operating range and extraction figures for both models at conditions close to your room.

At our assumed settings, four hours a day for 90 days comes to £23.69 at 250 W and £56.85 at 600 W. Equal running time is useful for an electricity comparison. To choose a model, also compare how long each one takes to dry the same laundry load or reach the humidity you want. If the room is damp because of a leak or ventilation problem, investigate the cause before buying.

3. Size the air fryer for the meals you cook

A 2,400 W air fryer can draw more per hour than a 2,000 W oven. At full power, 25 minutes in the air fryer works out to about 26p, while 50 minutes in the oven works out to about 44p. Thermostats change the actual draw. Include preheating for any recipe that needs it and use the same amount of food for both tests.

If you usually cook for one or two, compare a single basket with the dual-zone sale model. If you cook several trays at once or batch-cook for the freezer, the oven may do the whole job in one go. I’d write down three meals I actually cook and price the appliance that fits most of them.

4. Use built-in controls and check compatibility before measuring

Look for a timer or automatic shut-off that suits how you use the appliance. A Tapo P110 energy-monitoring plug (ad) or another suitable monitor can measure electricity where both manufacturers permit it. Check the plug’s supported load type and rating as well as the appliance instructions. Follow the appliance’s instructions for a directly connected or hardwired model.

For a heated throw, use its own controls and follow the manufacturer’s instructions about unattended or overnight use. A 120 W throw costs about 3.16p per hour at the example rate. It warms the person using it. If you need to warm the whole room, compare the heating boost against your actual fuel use and price.

How to stack savings when you find the right model

Check the exact model number on PriceSpy UK and compare delivered prices. Include installation, removal of the old appliance and any warranty differences. My guide to spotting fake Black Friday deals shows how to check what the item previously cost.

Compare TopCashback (ad) and Quidco (ad) before ordering. Check whether a voucher or gift card affects cashback on that exact order. My Black Friday cashback stacking guide shows how to compare the two routes. Count cashback once it is paid.

MoneyHelper’s Section 75 guide explains that an item with a cash price over £100 and up to £30,000 may qualify if you pay at least part directly by credit card and the required relationship applies. Check how gift cards or intermediaries could affect cover. Include card interest in your comparison if you won’t clear the balance in full.

What I’d do first

Use my smart meter guide to understand what your in-home display can show. For one compatible plug-in appliance, use an appropriate monitor to measure the whole job.

Write down how often you’ll use it, then find the model’s actual energy figure and your own tariff. Compare the saving over the time you expect to keep it. If a dearer appliance saves £20 each winter but costs £70 more upfront, it takes three and a half winters to recover the difference, assuming usage and tariff stay the same.

If this is part of a wider bills review, use the MoneySavvyUK calculators and my free 7-Day Financial Reset Kit. The Bills & Renewal Dashboard can help you track tariffs alongside other household costs.

Black Friday appliance running cost FAQs

Is an air fryer cheaper to run than an oven?

It can be cheaper for small portions that cook quickly. Compare the same meal and include preheating where needed. For batch cooking, the oven may fit multiple dishes in one session. Use measured kWh per meal when you can.

How much does a dehumidifier cost to run per hour?

At 26.32p per kWh, 250 W costs about 6.58p an hour and 600 W costs 15.79p an hour at those power levels. Your cost depends on the mode, temperature, humidity and how long the unit draws power.

How much does a heated throw cost to run per hour?

A 120 W throw running at that power for an hour uses 0.12 kWh, or about 3.16p at 26.32p per kWh. Lower settings or thermostat cycling can reduce consumption. Check the label and follow the operating instructions.

Is a heat-pump tumble dryer worth the higher price?

Compare kWh per cycle at a similar drum capacity and multiply the difference by the number of loads you dry each year. Then divide the upfront price premium by the yearly savings to estimate how long it takes to break even.

I’m not a financial adviser. These are illustrative running costs. Use your own tariff, actual usage and the manufacturer’s instructions before buying or operating an appliance.

Save this guide for later

Black Friday Appliances UK running cost checklist by MoneySavvyUK comparing electricity costs for air fryers, dehumidifiers, and heated throws

Follow MoneySavvyUK

Join me for practical UK money-saving tips, extra-income ideas and my latest guides.

Find me as @moneysavvyuk1 on Pinterest, X and YouTube. For future book releases, visit my Amazon author page and click Follow.